Digitus DS-23200, Руководство пользователя

Страница: 63 / 126

-63-
Notes :
1. The output image extension file name has to be ‘iso’, e.g.
CD-Rom_vir.iso.
2. You may create an ISO image size up to 650Mb (for CD-ROM). This
drive would be in read-only mode and would not allow you to write any
information on this drive but copying only. This drive would be bootable
under DOS mode if the motherboard/BIOS on the host computer
supports USB BOOTABLE function. For emulating DVD Drive, please
use
Drive Redirection function.
3. The above information has to be given from the point of view of IP-KVM
with correct IP address and device name. Administrative permission is
required as regular user may not have the right to access. Please login
as a system administrator (or as “root” on UNIX systems).
4. The specified image file is supposed to be accessible from the IP-KVM.
The information above has to be given from the point of view of the
IP-KVM. It is important to specify correct IP addresses, and device
names. Otherwise, IP-KVM may not be able to access the referenced
image file properly, leave the given file unmounted and will display an
according error message, instead. So, we recommend to state correct
values and repeat this step if necessary.
5. Furthermore, the specified share has to be configured correctly.
Therefore, administrative permissions are required. As a regular user
you may not have these permissions. You should either login as a
system administrator (or as “root” on UNIX systems), or ask your
system administrator for help to complete this task.
Operation Procedures:
1. Please run Nero or any CD/DVD imaging tool to create
CD/DVD ISO image.
2. Please create a folder and share this folder in the PC that shares out
the image file . Copy the CD/DVD ISO image file to this sharing folder.
(Please make sure password has to be setup with the authorized user
during Sharing => Permission settings)