-26-
7.7.5. User Authority setup
You can setup the authority which
only support Layer 1 and Layer 2
, and
Layer 3 authority always enable for each user
. Different user has
different access right for each channel. To change the access authority of
each channel for certain user, please move the highlight bar to the channel,
and press
<A>
,
<1>
,
<2>
or
<3>
to setup the channel access authority for
all or certain user. You don’t have to setup the authority of administrator
since the administrator has all channel access authorized right.
Please refer section 7.2.2 and 7.2.3 to operate OSD menu properly.
Figure 30: User authority setup window
7.8. Lock Port: <F6>
7.8.1. Lock Port
Only administrator can lock port. Please move the highlight bar to the
channel to lock, and press
<F6>
to lock the selected channel. A red
L
mark
will be shown in
STA
column of locked port.
Figure 31: Lock port in OSD main window
Содержание DS-23200
Страница 1: ... 1 8 PORT 16 PORT COMBO KVM SWITCH OVER IP User Manual ...
Страница 57: ... 57 2 Windows Settings Enter the Properties of Local Area Connection Make sure Wake on Magic packet is Enable ...
Страница 90: ... 90 Figure 67 Chain Rules of IP Filtering Check the Enable Group based System Access Control to edit the rules ...
