background image

 

 

 

 

126

 

Disclaimer 

Information in this document is subject to change without notice. The manufacturer does not make any 
representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and 
shall in no event be liable for any loss of profit or any other commercial damage, including but not limited to special, 
incidental, consequential, or other damages. 
     
No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, 
including photocopying, recording or information recording and retrieval systems without the express written 
permission of the manufacturer.     
 
All brand names and product names used in this document are trademarks, or registered trademarks of their 
respective holders.   
 

FCC Statement 

This device generates and uses radio frequency and may cause interference to radio and television reception if not   
installed and used properly. This has been tested and found to comply with the limits of a Class B computing device 
in accordance with the specifications in Part 15 of the FCC Rules. These specifications are designed to provide 
reasonable protection against such interference in a residential installation. However, there is no guarantee that 
interference will not occur in a particular installation. If this device does cause harmful interference to radio or 
television reception, which can be determined by plugging the device in and out, the user can try to correct the 
interference by one or more of the following measures: 

 

  Reorient or relocate the receiving antenna. 

  Increase the separation between the device and receiver. 

  Connect the computer into an outlet on a circuit different from that to which the receiver is connected. 

  Consult the dealer or an experienced radio/TV technician for help. 

 

 

 

Содержание DS-23200































































































































Отзывы: