DigiTech DigiGate-700, Руководство пользователя

Страница: 82 / 266

3 - 2 Operating Instructions
DigiGate-700
for Windows
™ ®
Introduction
This section deals with the operation of the DigiGate-700 for Windows program. The Setup button of the
Main Menu
was covered in Chapter 2. This chapter covers the other 12 buttons on the
Main Menu
to
provide a step by step guide of every operation in the program. This is the complete reference for normal use
of the program. Once you have become familiar with the
DigiGate-700 for Windows program, you can find
a quick reference to the different operations in “Chapter 4, How Do I ...?”
If you have more than one site controlled by this software system, always
verify that you are connected to the correct site before manipulating tenants
or units. You can quickly locate this information in the center block of the
status bar at the bottom of the Main Menu.
1. From the
Main Menu
, Click on the
Move In
button. Figure 3-1.
2. This will open the
Select Unit to Move In
screen. Figure 3-2.
3. Enter a valid unit number in the
Unit Number
field and Click on the
OK
button to open the
Move In Tenant
window shown in Figure 3-5,
Page 3-4.
OR
If you want to find a vacant unit of the right
size,
Click on the
Size
field.
Figure 3-1
Figure 3-2
Move In (Renting a Unit)
Selecting a Unit