DigiTech DigiGate-700, Руководство пользователя

Страница: 67 / 266

2 - 39 DigiGate-700
™
for Windows
®
- User’s Guide
DigiGate-700
for Windows
™ ®
1. Click on the
Unit Setup
tab of the
Setup
Menu
, then Click on the
Add Units
button.
Figure 2-76.
2. This will open the
Add Units
window.
Figure 2-77.
NOTE: The
Unit Number
tab is active and
there are four additional tabs whose screens
hold the additional information that was
selected or deselected in the Required Fields
section.
Unit numbers can be one to six digits in
length. Valid characters are A - Z, 0 - 9, -, and
*. If adding a block of units the starting and
ending unit numbers should be the same length
(i.e. starting unit A001, ending unit A010).
3. To add a consecutively numbered group of
units, Select the
Starting Unit Number
field
and enter the first number. Figure 2-77.
4. Select the
Ending Unit Number
field and
enter the last number. Figure 2-77.
NOTE: To add one unit, enter the same
number in the
Starting Unit Number
and
Ending Unit Number
fields.
5. To increment numbers by a value other than
one, enter the value in the
Increment By
field.
6. If you do not have Required Fields or Door
Alarm information for this group, Click on the
OK
button. The
Add Unit Progress
bar will
reflect the units being added. Otherwise
continue with the following steps.
Figure 2-76
Figure 2-77
Adding Units
Before you can rent units at your location, you must create (add) the units in the DigiGate database. This
procedure can be very simple or more involved depending on what information you have chosen to maintain
in the “Required Fields” section, how your site is numbered, and how your units types are laid out. When you
initially
Add
units to the database you can enter groups or blocks of numbers which share common features.
Later when you need to modify or change information, it must be done on one at a time basis. Because this
can be very time consuming, we suggest you see “Appendix C, Preparation for Adding Units” to aid in
deciding what is the most efficient way to proceed in this section. This procedure must be done for each
site individually!
Use the
Site
button on the
Main Menu
to Select sites .
Unit Numbers