The PWR Key is also used to turn on and off the flashlight feature. The flash-
light LED will be on as long as you hold down the PWR Key.
4.16 OPTN t Key
The OPTN t Key
is used to enter the Option Mode to set throttle and sys-
tem options. It is also used to issue t (thrown) commands when the throttle in
in Switch mode.
In the case of turnout control:
t=thrown, turnout is set for the diverging route through the curved leg.
4.17 CLOC c Key
The CLOC c Key
is used to toggle between displaying and not displaying
the current fast clock time. It is also used to issue c (closed) commands when
the throttle in in Switch mode.
In the case of turnout control:
c=closed, turnout is set for the main line with routing through the straight
leg of the turnout.
4.18 EXIT Key
The EXIT Key
is used to exit the current throttle task without making
changes. Pressing this key will usually return the DT400 to Fn mode for regu-
lar locomotive operation.
4.19 ENTER Key
The ENTER
is used to complete the current throttle task and return to Fn
mode for normal operations.
4.20 EMRG STOP Key
Your DT400 comes from the factory set for “Local” Stop.
When you press
the EMRG STOP Key
, the loco address that is active on your display (the
one with the blinking smoke) will stop. When you press the EMRG STOP Key
again, the loco address on the other throttle of your DT400 will stop.
EMRG
STOP
EMRG
STOP
E N T E R
E N T E R
E X I T
E X I T
CLOC
c
CLOC
c
OPTN
t
OPTN
t
25
