6. If you unplug the DT400 from LocoNet the LCD will go off while
it is unplugged.
It will come on again when you plug in to LocoNet
again.
3.1 Turn track power on and off
The track power indicator on your DT400 shows whether track power is
on or off. If the track power indicator is lit then track power is on.
If it is not lit, turn track power on as follows:The throttle will
prompt you with a screen similar to this:
How To Turn Track Power On and Off
1. Turn track power on:
Press the PWR Key
, the DT400 will prompt you with a screen simi-
lar to this:
Press the Y + Key
and the Track Power Indicator on your DT400
display and on your command station will come on.
2. Turn track power off:
Press the PWR Key
, then press the N - Key
. The Track
Power Indicator on your DT400 and on your command station will
go off.
3. Exit PWR mode by pressing the PWR Key
again or by press-
ing any other key on the throttle to initiate the next throttle task.
PWR
N
PWR
Y
+
This display shows a DT400 in PWR mode.
1. Track power is currently on.
2. The L throttle does not have a loco selected.
3. The R throttle is running address 25 in the
forward direction at 50% speed.
4. Press the Y+ Key to turn track power on.
Track Power Indicator
PWR
8
