Digital Equipment PRIORIS MTE, Руководство по техническому обслуживанию

Страница: 54 / 73

Troubleshooting Digital PRIORIS MTE Server
54 MCS Logistics Engineering - Nijmegen
P
R
I
O
R
I
S
M
T
E
Monitor Troubleshooting
(continued)
Problem Possible Cause Action
Monitor
display not
centered while
loading
Windows video
drivers Monitor type incorrectly set. Set the correct monitor type.
QAPlus/FE Advanced Diagnostics
Run QUAPlus/FE Advanced Diagnostics to:
♦
Receive System Information. Select SysInfo menu from the main menu.
♦
Locate bad chips and run mouse and keyboard tests. Select Interact menu.
♦
Edit CMOS. Select Setup menu.
♦
Run tests on components. Select Testing menu.
Default testing is No Pause on Errors/Single Pass/No Peripherals/No Error Logging/Test All Components.
To change default, select settings under the Testing menu before running tests.
QAPlus/FE Error Messages
Component Messages Solution
CPU Arithmetic Function Failed
General Functions Failed
Exception Interrupt in Protected Mode
Refresh Failure
Logic Functions Failed Reset CPU
Replace CPU
Hard disk Butterfly Cylinder Access Test Failed
Cylinder 0 Errors
Random Cylinder Access Failed
Linear Cylinder Access Failed Low-level format hard disk
Replace disk
Hard
drive/controller
Controller Diagnostic Test Failed
Questionable Controller Card
Hard drives failed Run Setup, Check connections,
Reset controller, Replace controller,
Replace disk
Floppy diskette
Media Mismatch
Drive Not Ready
Write Protected Media
Unformatted Media
Use known good diskette
Check size and density of diskette
Close drive door
Remove write protection
Format diskette
Floppy drive Floppy Drives Failed Check connections, Replace drive
Battery/clock Clock Stopped
Invalid Date
RTC Interrupt Failed Run Setup
Replace battery/clock