Digital Equipment PRIORIS MTE, Руководство по техническому обслуживанию

Страница: 52 / 73

Troubleshooting Digital PRIORIS MTE Server
52 MCS Logistics Engineering - Nijmegen
P
R
I
O
R
I
S
M
T
E
Server Troubleshooting
(continued)
Problem Possible Cause Action
Computer does
not boot from a
target diskette
drive Drive ID incorrectly set.
Diskette drive not enabled.
Diskette does not contain start-up
files.
Loose cables.
Make sure the drive ID is correctly set.
Run the SCU to enable the diskette drive.
Insert a diskette with the correct start-up files.
Secure all cable connections.
No response to
keyboard
commands Keyboard is password protected.
Keyboard is connected to the
mouse port.
Enter the keyboard password.
Connect the keyboard to the keyboard port.
No response to
mouse
commands Mouse is password protected.
Mouse is connected to the
keyboard port.
Mouse driver not installed.
Enter the keyboard and mouse password.
Connect the mouse.
Install the appropriate mouse driver; refer to the
supplied application software documentation.
IDE hard disk
drive cannot
read or write
information. Incorrect disk drive jumper
settings.
Loose or incorrectly installed
cables.
IDE/SCSI hard disk drive is not
correctly formatted or partitioned.
IDE drive type incorrect.
IDE main logic board jumper
incorrectly set.
Refer to the supplied kit installation instructions.
Make sure all cables are correctly installed.
Format and partition as required using the supplied
operating system.
Run the SCU to identify the correct drive type.
Set the jumper for IDE or operation.