Digital Equipment PRIORIS MTE, Руководство по техническому обслуживанию, Страница: 53 / 73

Digital PRIORIS MTE Server Troubleshooting
MCS Logistics Engineering - Nijmegen 53
P
R
I
O
R
I
S
M
T
E
Disk Drive Troubleshooting
Problem Possible Cause Action
IDE/SCSI hard
disk drive
cannot read or
write
information Incorrect disk drive jumper
settings.
Loose or incorrectly installed
cables.
IDE/SCSI hard disk drive is not
correctly formatted or partitioned.
IDE drive type incorrect.
Refer to the supplied kit installation instructions.
Make sure all cables are correctly installed.
Format and partition as required using the supplied
operating system.
Run the SCU to identify the correct drive type.
Target diskette
drive cannot
read or write
information
Diskette is not formatted.
Diskette is worn or damaged.
Diskette write protection enabled.
Format the diskette.
Try another diskette.
Run the SCU and set the Diskette Write Protection
option to "Disabled."
Monitor Troubleshooting
Problem Possible Cause Action
No screen
display
Configuration error. Run the SCU to configure the server for VGA
operation. Set the jumper for VGA operation.
No monitor
display while
loading
Windows video
drivers Monitor type incorrectly set. Set the correct monitor type.
Distorted,
rolling, or
flickering
screen display,
or wrong /
uneven color
Monitor incorrectly adjusted.
Monitor signal cable incorrectly
installed.
Adjust accordingly.
Straighten any bent connector pins and then
reconnect.
Color monitor
displaying
monochrome Server was turned on before the
monitor was turned on.
Video jumper incorrectly set.
Turn off the server, turn on the monitor, then turn
the server back on.
Set the jumper for VGA operation.
Monitor fails
to switch to
high-resolution
mode
Appropriate high-resolution
video drivers are not installed or
incorrectly installed. Correctly install all appropriate high-resolution
video drivers.