Digital Equipment PRIORIS MTE, Руководство по техническому обслуживанию

Страница: 18 / 73

Server Utilities & configuration Digital PRIORIS MTE Server
18 MCS Logistics Engineering - Nijmegen
P
R
I
O
R
I
S
M
T
E
Step 3: View or Edit Details
This menu item allows to examine and change the setting of each function and the resource allocated for those
functions. When editing a function or resource in this step, you might have to change the switch or jumper
setting.
Step 4: Examine Required Switches
This menu item allows to view settings (switches and jumpers) that need to be manually set and software
drivers that need to be installed. These recommendations must be followed exactly, otherwise the server will
not work properly.
Step 5: Save and Exit
This menu item allows to exit the SCU program with or without saving the configuration settings.
Adding ISA Boards
Perform the following steps to add ISA boards to the server configuration:
1) Select "Step 2: Adding and Removing Boards", and update the list of boards and options to include any
ISA boards to be installed in the server.
2) Select "Step 4: Examine Required Switches", to check the required switch and jumper settings of the ISA
boards.
3) Select "Step 5: Save and Exit", to save the configuration and exit the SCU.
4) Turn off the server and install the ISA boards.
CAUTION
Do not attempt to install boards while the server is turned on.
SCU and Setup Options
The following tables list the options that are available in the BIOS Setup utility and in the SCU (View or Edit
details). Use the keyboard function keys to help select options, change values, and display help information.
NOTE The ROM BIOS Setup utility and the SCU contain the same options as those listed.
Digital recommends to use the SCU to configure the server each time you add
hardware, remove hardware, or change server settings.