Digital Equipment PRIORIS MTE, Руководство по техническому обслуживанию, Страница: 39 / 73

Digital PRIORIS MTE Server Service Procedures
MCS Logistics Engineering - Nijmegen 39
P
R
I
O
R
I
S
M
T
E
Removing Power Supply
To remove the power supply:
1) Turn off external devices and server.
2) Disconnect external devices, ac power, and monitor power.
3) Unlock and remove side panel.
4) Remove metal shield.
5) Remove the upper and lower devices.
6) Step 1: Remove ON/OFF switch (see Figure 3 - 12).
7) Step 2: Remove screw from the Powerplug and pull out the power plug (see Figure 3 - 13).
8) Step 3: Remove four screws from the rear. (See Figure 3 - 14 ).
9) Step 4: Carefully remove power supply from server. (See Figure 3 - 15).
Figure 3 - 12 Removing Figure 3 - 13 Removing the power plug
the ON/OFF Switch