Digital Equipment PRIORIS MTE, Руководство по техническому обслуживанию

Страница: 48 / 73

Troubleshooting Digital PRIORIS MTE Server
48 MCS Logistics Engineering - Nijmegen
P
R
I
O
R
I
S
M
T
E
POST and Boot Messages
The POST displays messages to alert to errors in hardware, software, and firmware or to provide operating
information about the computer.
Each time the POST displays a message on the screen, the computer's speaker beeps twice. If an error occurs
before the monitor is initialized, specific beep codes sound to alert to a problem. The table below lists a general
grouping of system messages arranged by the POST countdown number. In addition, each message is
accompanied by text describing the message and in most cases a recommended solution to the problem.
NOTE Italics indicate variable parts of a message such as memory addresses, hexadecimal
values, and so on. These messages can differ at each occurrence.
POST Countdown
Number Message
Number Message Solution
240 0007 No timer tick Replace main logic
board.
200 0001 Shutdown failure Replace main logic
board.
190 0009
Timer 2 failure Replace main logic
board.
180 0010 Keyboard stuck key
Keyboard controller
Keyboard clock line
Keyboard data line
Keyboard failure Check the keyboard
connection. If the
connection is secure, the
keyboard or keyboard
controller might have
failed. Replace
keyboard.
170 0041 Mouse failure Check the mouse
connection. If the
problem persists, replace
the mouse.
160 —
640 KB base memory
0 KB extended memory —
150 0017 Time-of-day clock
stopped Replace RTC.
100 0018
Invalid configuration
information Run the SCU.
090 0011 Diskette drive failure Run the SCU. Check all
connections. If the
problem persists, replace
the diskette drive.
080 0015 Hard disk controller
failure Run the SCU. Check all
connections. If the
problem persists, replace
the controller.