Digital Equipment LA310, Инструкция по установке и эксплуатации

Страница: 84 / 208

Configuring the Printer
4.3 Set-up Mode Buttons and Indicators
4.3.6 Optional Emulation Selection Set-up
Optional emulation can be the resident EPSON FX-1050 emulation, or
emulation provided by a cartridge installed in the printer. To determine
which optional emulation you want to use, you must define the emulation
using optional emulation set-up.
To enter the optional emulation selection set-up:
1. Set the power switch to OFF (0).
2. Press and hold simultaneously the SET-UP and PROTOCOL buttons.
3. Set the power switch to ON (1).
If tractor mode is set, and paper has not already been inserted, the printer
loads paper automatically.
4. The printer enters Optional Emulation Selection Set-up.
All indicators (except the Fault indicator) flash simultaneously.
5. Use or
!
to move the red triangle to the EPSON FX-1050 or
CARTRIDGE setting.
6. Press
#
to select the setting you require.
7. Press
!
to move to the MAIN SET-UP option, and press
#
to move back to
the Main Set-up menu.
OR
Press the Set-up key to exit this set-up and save the new setting
4–8 Configuring the Printer