Digital Equipment LA310, Инструкция по установке и эксплуатации

Страница: 79 / 208

Configuring the Printer
4.3 Set-up Mode Buttons and Indicators
4.3 Set-up Mode Buttons and Indicators
There are five buttons on the control panel that perform functions in Set-up
mode.
Normal mode
function Set-up mode
function
Set-up function
Ready Set-up Enter/Exit Set-up mode
Quiet/Quality
!
Next Item
LF/Protocol
#
Select item at red triangle
Parking Previous Item
FF
"
Return to previous menu level
4.3.1 Entering Set-up Mode
Digital recommends that you enter Set-up mode in tractor-feeding mode, and
not cut sheet mode.
NOTE: You must not run Set-up mode with the Pull Tractor option installed.
To enter Set-up mode:
1. Press and hold down the Set-up button while setting the power switch
to ON (1). If you have put paper in the parking position and use tractor
feeding, paper is loaded automatically.
Do not release the Set-up button until the printhead has started moving.
The printer automatically prints the first part of the Set-up directory:
Configuring the Printer 4–3