Digital Equipment LA310, Инструкция по установке и эксплуатации

Страница: 117 / 208

Defining Form Settings
C.1 User Form Length Mode
All indicators switch off for approximately one second, and the printer
resets automatically to normal operation.
In single-sheet mode, the current sheet is ejected before the printer returns
to normal operation.
C.1.3 Checking the Form Length Value Store
As the form length setting is set automatically, you may want to check its
value.
To check the value:
1. Enter Set-up.
2. Print the configuration list.
The entry FORM LENGTH in the GENERAL menu is set to USER. The
entry USER FORM LENGTH contains the length previously entered in
one-twelfths of an inch. For example, 132 (the default setting) indicates a
form length of 132 twelfths of an inch, or 11 inches.
Through Set-up mode from the GENERAL main menu, you can change the
form length setting to any of the available values; the User Form Length value
determined by the above procedures is not altered as a result of your selection
of a value.
When recalling the factory default settings for all parameters (entry FACTORY
DFLT), the User Form Length is not altered, but the form length setting under
the GENERAL main menu is reset to the default setting (11 inches).
Defining Form Settings C–3