Digital Equipment LA310, Инструкция по установке и эксплуатации

Страница: 54 / 208

Loading the Paper
3.2 Loading Paper
3.2 Loading Paper
There are three ways to load paper for the LA310 MultiPrinter:
• Load pinfeed paper using the push tractors at the back of the printer
(factory default).
• Hand feed single sheets from the rear of the printer carriage.
• Using the optional pull tractor. Refer to the LA310 MultiPrinter Pull
Tractor Guide.
These methods are illustrated in the cross-section diagrams later in this
section. Table 3–2 contains information on the recommended paper for each of
the three methods.
Table 3–2 Loading Methods and Types of Paper
Method Type of Paper
Push Tractor Pinfeed Paper
Labels on continuous media
Multipart Forms (one original and three copies)
Single-sheet
Loading Single Sheets
Envelopes
Pull Tractor option Pinfeed Paper
Multipart Forms (one original and four copies)
Labels on continuous media
Loading Methods
In Figure 3–2, Diagram A1 shows the Push Tractor method with the back cover
in the sloping position (for multipart forms, single continuous pinfeed forms,
and for Document on Demand feature); Diagram A2 shows the Push Tractor
method with the back cover in the horizontal position (for single continuous
pinfeed forms, and lowest noise configuration); Diagram B shows the Single-
sheet Loading method, and Diagram C shows the optional Pull Tractor option
(see also the LA310 MultiPrinter Pull Tractor Guide).
3–4 Loading the Paper