2
Installing Your System
Setting up your InfoServer 150 system is easy. This chapter provides
step-by-step instructions on how to perform the following operations:
•
Choose the right location for the system
•
Unpack and inspect system components
•
Connect system components
•
Start the system
•
Load and unload compact discs
•
Connect the system to the network
•
Turn off the system
•
Bootstrap the system
•
Recover from bootstrap failures
2.1 Choosing the Right Location for the System
Use the following checklist to keep your system operating at its best:
•
Carefully read all installation instructions before you turn on the power.
•
Keep the air well circulated to prevent excess heat and dust from
accumulating.
•
Keep your equipment away from heaters, photocopiers, direct sunlight, and
abrasive particles.
•
Before you set up your system, select a surface that is large enough to hold
the system unit. Your desk or work table is a good choice.
•
Keep the area clean. Do not place food or liquid on or near your equipment,
and do not place your system unit directly on the floor. Dust and dirt will
damage the system components.
2–1
