Installing Your System
2.5 Loading a Compact Disc
The green activity light should turn on within 5 seconds. If the drive
accepts the disc and caddy but the light does not come on, the disc might
be sitting incorrectly in the caddy. Remove the disc and check that the
label is facing up when you insert the disc into the drive again. If the
activity light still does not come on, there might be a problem with the
RRD42 drive. Contact your local Digital service representative.
The drive reads the Table of Contents (TOC) on the disc. The BUSY
indicator lights while the TOC is read. When the BUSY indicator light
goes off, the drive is ready to receive commands.
2.6 Unoading a Compact Disc
Before unloading a compact disc, make sure that the green activity light is not
flashing. If the light is flashing, the compact disc drive is transferring data.
Wait until the green activity light stops flashing.
Press the EJECT button on the drive to eject the caddy as shown in
Figure 2–11.
Figure 2–11 Ejecting the Caddy from the Drive
SHR−XR0075−90A
The EJECT button on the RRD42 drive does not function when disabled by
software or if power to the drive is turned off. Use the following procedure for
manual ejection:
2–16
