Digital Equipment DECrepeater 90FS, Руководство по установке и настройке

Страница: 18 / 80

10 DECrepeater 90FS Installation and Configuration
Installing the Module (Cont.)
Installing the Module into a DEChub 900 (Cont.)
3 Verify that the module’s Power
LED lights immediately and
Module OK LED lights within
1 minute.
a. The Power LED lights when
power is applied, then the mod-
ule performs a self-test.
b. After the module completes
self-test, the Module OK
LED lights and remains lit, then
the Hub Manager status display
shows:
DECrepeater 90FS
up.
NOTE: If the LEDs do not operate as described, refer to the
section titled Problem Solving Using the LEDs.
Go to the section titled Connecting the Cables.
LKG–9550-94I