Digital Equipment DECrepeater 90FS, Руководство по установке и настройке

Страница: 37 / 80

Appears only if the module has
been previously configured.
Enter the SNMP trap address that you have
chosen, then press Return.
Appears only if the module has
been previously configured.
DECrepeater 90FS Installation and Configuration 29
Configuring the Module (Cont.)
[5] Add SNMP Trap Addresses
This option prompts you to enter IP addresses to which SNMP traps will be sent from
the module.
The format for an SNMP trap address is the standard 4-octet dotted decimal notation,
where each octet of the address is represented as a decimal value, separated by a
decimal point (.).
The following is an example of an SNMP trap address:
16.20.54.156
The following is an example of the dialog associated with this option (user response
is shown in boldface type):
Enter selection : 5
DECrepeater 90FS – slot 3
ADD SNMP TRAP ADDRESSES
Format: The standard 4 octet dotted decimal notation in which
each octet of the address is represented as a decimal
value, separated by a ’.’ character.
example: 16.20.54.156
Configured SNMP Trap Addresses: 16.20.216.81
Trap address [] : 16.20.54.156
Return
Trap address added! Add another? [] :
Return
Press Return for Main Menu ...