Digital Equipment DECrepeater 90FS, Руководство по установке и настройке

Страница: 46 / 80

38 DECrepeater 90FS Installation and Configuration
Configuring the Module (Cont.)
[10] Downline Upgrade (Cont.)
When you press
Return
, the screen prompts you to
Enter the Load Filename
.
Do the following:
•
If the file is located in the default TFTP directory, enter only the filename.
•
If the file is not located in the default TFTP directory, enter the complete
pathname along with the filename.
The following example shows the dialog associated with this option using a file that is
located in the default directory (user response is shown in boldface type):
Enter the Load Filename [] defmi110.bin Return
After you enter the firmware image load filename and press
Return
, the screen
prompts you to enter the IP address of the TFTP server (load host):
Enter the Load Host IP Address [] :16.20.54.156 Return
After you enter the load host IP address, the following screen and dialog appear:
Load will be initiated over the Ethernet Port network
interface.
The device becomes nonfunctional for up to 10 minutes
during the time that the flash load is in progress.
When the load is complete the screen displays the message:
(Device Not Responding!) This is normal.
... Press Return Key to Start Load [Ctrl/C to abort]...
NOTE: The DECrepeater 90FS is nonfunctional only during
reset and self-test (about 1 minute of Stage 4) of the DLU
process. During the first three stages of the process, the
module continues to function as a repeater.
When you press
Return
, the DLU process is initiated over the Ethernet port network
interface.