Digital Equipment DECrepeater 90FS, Руководство по установке и настройке

Страница: 10 / 80

2
DECrepeater 90FS Installation and Configuration
Introduction (Cont.)
Features
Your DECrepeater 90FS module includes the following features:
•
ThinWire, 10Base2 port available as an external connection on the module side
panel (when the module is installed as a standalone unit) or to the backplane
segment in a DEChub 900 or a DEChub 90.
•
Backplane access to another Ethernet LAN through a single flexible channel in a
DEChub 900.
•
Automatic module self-test at powerup.
•
Port-level packet address security.
•
In-band Simple Network Management Protocol (SNMP) management.
•
OBM using SNMP over Serial Line Internet Protocol (SLIP) provides an addi-
tional path to the normal in-band management as follows:
– Through the OBM connector on the DEChub 900 Hub Manager
– Through the front-panel serial port on the module when the module is
installed into a DEChub 90 as a standalone unit.
•
Built-in SNMP agent supports the following management information bases
(MIBs):
– Ethernet-like Interface Type MIB (RFC 1398)
– Internet Engineering Task Force (IETF) Repeater MIB (1516)
– Digital Extended Repeater MIB
– DEChub 900 Public Common MIB
– MIB II (RFC 1213)
•
Manageability using any generic SNMP management application that supports
the MIBs listed above.
•
Upgradeable device firmware (in nonvolatile Flash memory) using Trivial File
Transfer Protocol (TFTP) with Digital’s Network Device Upgrade (DECndu) Plus
utility or through the setup port with any TFTP server.
•
User-friendly advanced Graphical User Interface (GUI) manageability with
Digital’s HUBwatch Network Management Station (NMS) application.