Digital Equipment DECrepeater 90FS, Руководство по установке и настройке

Страница: 14 / 80

6 DECrepeater 90FS Installation and Configuration
Installing the Module
Installing the Module as a Standalone Unit
NOTE: Install the module horizontally to ensure that the fans
have at least 2 inches of clearance.
1 Connect the ThinWire
T-connector:
a. Attach the ThinWire T-connec-
tor to the BNC connector and
turn the connector one-quarter
turn to the right until the connec-
tor locks into place.
b. Attach the ThinWire backbone
segment to one of the BNC con-
nectors on the T-connector.
c. Install a terminator on the other
end of the T–connector, or con-
nect a ThinWire cable to anoth-
er 10Base2 device.
NOTE: To disconnect the ThinWire
T-connector, turn the connector
one-quarter turn to the left until
the connector clears the BNC
connector stem, then disconnect
the cable.
2 Connect the power cable.
a. Connect the cable from the
power supply (Digital Part Num-
ber: H7827-BA) to the power
connector on the back of the
module.
b. Plug the power supply cable
into the power supply, then into
a wall outlet.
LKG-9174-93I