Digital Equipment DECrepeater 90FS, Руководство по установке и настройке

Страница: 27 / 80

DECrepeater 90FS Installation and Configuration 19
Configuring the Module (Cont.)
Accessing the Setup Port
To use one of the ports to configure the module, do the following:
1. Ensure that the transmit and receive baud rates on the setup port device are
set to 9600 baud.
2. Connect the setup port device as follows:
a. If you are installing the module into a DEChub 900, connect the setup port
device cable to the setup port on the DEChub 900 (see illustration).
b. If you are installing the module into a DEChub 90 or as a standalone unit,
connect the setup port device cable to the front-panel serial port on the
module (see illustration).
Setup
port
DECrepeater 90FS
front-panel
serial port
DEChub 900 MultiSwitch
H8571-J
H8575-A
To setup port
device
BN24H
cable
H8571-J
H8575-A
To setup port
device
LKG-8825-94I
BN24H
cable
3. Press
Return
on the setup port device a few times until a menu appears.