Digital Equipment AlphaServer 2000, Руководство пользователя

Страница: 38 / 196

Turning the System On
Note
If you do not see either a console prompt or the Boot
menu, press
Return
several times.
If the screen display on your terminal does not
correspond to the operating system that you plan to
boot, switch to the other console firmware as described
below.
Switching from SRM to ARC
To switch from the SRM console to the ARC console, enter the
arc command:
P00>>> arc
Once the console firmware is loaded and the system is initialized,
the first screen of the ARC console is displayed.
Switching from ARC to SRM
Switch from the ARC console to the SRM console as follows:
1. From the Boot menu, select
Supplementary menu
.
2. From the Supplementary menu, select
Set up the
system . . .
.
3. From the Setup menu, select
Switch to OpenVMS or OSF
console.
4. Select your operating system console, then select the Setup
menu and press Enter.
5. When the message Power-cycle the system to implement
the change is displayed, press the Reset button.
Once the console firmware is loaded and the system is initialized,
the SRM console prompt is displayed.
Preboot Tasks You may need to perform some of the following tasks before
booting your operating system.
• Run the EISA Configuration Utility.
• Check required environment variable settings.
• Change the way your system powers up or boots.
1–20 Basic Operation