Digital Equipment AlphaServer 2000, Руководство пользователя

Страница: 117 / 196

Configuring EISA and ISA Options
4. After you have saved configuration information and exited
from the ECU:
• Systems running Microsoft Windows NT—Remove
the ECU diskette from the drive and boot the operating
system.
• Systems running DEC OSF/1 or OpenVMS—Remove
the ECU diskette from the drive. Return to the SRM
console firmware as follows:
a. From the Boot menu, select
Supplementary menu
.
b. From the Supplementary menu, select
Set up the
system . . .
. The Setup menu is then displayed.
c. From the Setup menu, select
Switch to OpenVMS
or OSF console.
This allows you to select your
operating system console.
d. Select your operating system console, then select
Supplementary menu, and save changes . . . .
e. When the message Power-cycle the system to
implement the change is displayed, press the Reset
button. (Do not press the DC On/Off button.) Once
the console firmware is loaded and device drivers are
initialized, you can boot the operating system.
5. Verify that the new options are configured correctly.
Options and Upgrades 3–33