Digi IX10, Руководство пользователя

Страница: 95 / 874

Interfaces Wireless Wide Area Networks (WWANs)
IX10 User Guide 95
n
port : Applies this configuration to a modem attached to the identified physical port.
l
If port is used, set modem's port:
a. Determine available ports and correct syntax by using the ? :
(config)> network modem modem port ?
Match port: The physical port that the modem device is
attached to.
Format:
/device/usb/modem/module
Default value: /device/usb/modem/module
Current value: /device/usb/modem/module
(config)> network modem modem port
b. Set the port:
(config)> network modem modem port /device/usb/modem/module
(config)>
The default is any .
5. Set the SIM slot that should be used by the modem:
(config)> network modem modem sim_slot value
(config)>
where value is one of the following:
n
any : Uses either SIM slot.
n
1 : Uses the first SIM slot.
n 2 . Uses the second SIM slot.
The default is any .
6. If sim_slot is set to any , set the SIM slot that should be considered the preferred slot for this
modem:
(config)> network modem modem sim_slot_preference value
(config)>
where value is one of the following:
n
none : Does not consider either SIM slot to be the preferred slot.
n 1 : Configures the first SIM slot as the preferred SIM slot.
n
2 . Configures the second SIM slot as the preferred SIM slot.
In the event of a failover to a non-preferred SIM, or if manual SIM switching is used to switch to
a non-preferred SIM, the modem will attempt to reconnect to the SIM in the preferred SIM slot.
The default is
none .
7. Set the maximum number of interfaces. This is used when using dual-APN SIMs . The default is
1 .