Digi IX10, Руководство пользователя

Страница: 194 / 874

Serial port Configure Modbus mode
IX10 User Guide 194
b. Data bits : For Data bits , select the number of data bits used by the device to which you
want to connect. The default is 8 .
c. Parity : For Parity , select the type of parity used by the device to which you want to
connect. The default is None .
d. Stop bits : For Stop bits , select the number of stop bits used by the device to which you
want to connect. The default is 1 .
e. Flow control : For Flow control , select the type of flow control used by the device to
which you want to connect. The default is None .
1. Set the baud rate used by the device to which you want to connect:
(config)>path-parambaudrate rate
(config)>
2. Set the number of data bits used by the device to which you want to connect:
(config)>path-paramdatabits bits
(config)>
3. Set the type of parity used by the device to which you want to connect:
(config)>path-paramparity parity
(config)>
Allowed values are:
n
even
n
odd
n
none
The default is none .
4. Set the stop bits used by the device to which you want to connect:
(config)>path-paramstopbits bits
(config)>
5. Set the type of flow control used by the device to which you want to connect:
(config)>path-paramflow value
(config)>
where value is one of:
n
none
n
rts/cts
n xon/xoff
8. Save the configuration and apply the change:
(config)> save
Configuration saved.
>