Digi IX10, Руководство пользователя

Страница: 454 / 874

Services Location information
IX10 User Guide 454
3. Click Services > Location > Location sources .
4. Click

to add a location source.
5. (Optional) Type a Label for this location source.
6. For Type of location source , select Server .
7. For Location server port , type the number of the UDP port that will receive incoming location
messages.
8. Click Access control list to configure access control:
n
To limit access to specified IPv4 addresses and networks:
a. Click IPv4 Addresses .
b. For Add Address , click

.
c. For Address , enter the IPv4 address or network that can access the device's
location server UDP port. Allowed values are:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 192.168.1.0/24.
l
any : No limit to IPv4 addresses that can access the location server UDP port.
d. Click

again to list additional IP addresses or networks.
n To limit access to specified IPv6 addresses and networks:
a. Click IPv6 Addresses .
b. For Add Address , click

.
c. For Address , enter the IPv6 address or network that can access the device's
location server UDP port. Allowed values are:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 2001:db8::/48.
l
any : No limit to IPv6 addresses that can access the location server UDP port.
d. Click

again to list additional IP addresses or networks.
n
To limit access to hosts connected through a specified interface on the IX10 device:
a. Click Interfaces .
b. For Add Interface , click

.
c. For Interface , select the appropriate interface from the dropdown.
d. Click

again to allow access through additional interfaces.