Digi IX10, Руководство пользователя

Страница: 457 / 874

Services Location information
IX10 User Guide 457
a. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Click Services > Location > Destination servers .
4. For Add destination server , click

.
5. (Optional) For Label , type a description of the location destination server.
6. For Destination server , enter the hostname or IP address of the remote host to which location
messages will be sent.
7. For Destination server port , enter the UDP or TCP port on the remote host to which location
messages will be sent.
8. For Communication protocol , select either UDP or TCP .
9. For Forward interval multiplier , select the number of Location update intervals to wait
before forwarding location data to this server. See Configure the location service for more
information about setting the Location update interval .
10. For NMEA filters , select the filters that represent the types of messages that will be forwarded.
By default, all message types are forwarded.
n
To remove a filter:
a. Click the down arrow (

) next to the appropriate message type.
b. Click Delete .
n
To add a message type:
a. For Add NMEA filter or Add TAIP filter , click

.
b. Select the filter type. Allowed values are:
l
GGA : Reports time, position, and fix related data.
l
GLL : Reports position data: position fix, time of position fix, and status.
l
GSA : Reports GPS DOP and active satellites.
l
GSV : Reports the number of SVs in view, PRN, elevation, azimuth, and SNR.