DC-400
Operation Manual
Service & Support Dept. ©2018 SHANGHAI TERAOKA ELECTRONIC CO., LTD.
37 of 65
Base Type 2
Item data in Base Type 2 are Alpha-numeric data. The print position of item data can be programmed by setting the max.
print area , X / Y value, width of print area from X value, height of print area from Y value and print angle.
OPERATION
DISPLAY
REMARK
WEIGHT
UNIT WEIGHT
QUANTITY
Continued from the procedure Basic Setting: (width, height, angle and label type)
S8.5
← 13
F ITEM
Item setting: Factory.
[*]
S8.5
0
X MM
Enter item data programming mode.
[1][0][*]
S8.5
0
Y MM
Enter X value (Ex.10mm).
[1][*]
S8.5
0
DG ANGLE
Enter Y value (Ex.1mm).
[>>][>>][*]
S8.5
0
WT MM
Select print angle (Ex.180 degree).
[2][0][*]
S8.5
0
HT MM
Enter width value.
The width of Factory printing area is 20mm
(Ex. 20mm).
[1][5][*]
S8.5
0
STATUS
Enter height value.
The height of Factory printing area is 15mm
(Ex. 15mm).
[2]
S8.5
2
STATUS
Enter print status (Ex. ALL PRINT).
[*]
S8.5
← 13
F ITEM
