DC-400
Operation Manual
Service & Support Dept. ©2018 SHANGHAI TERAOKA ELECTRONIC CO., LTD.
38 of 65
Base Type 3
Item data in Data Base 3 is Barcode data. The print position of bar-code data can be programmed by setting X / Y value,
width of Barcode from X value, height of Barcode from Y value and print angle.
OPERATION
DISPLAY
REMARK
WEIGHT
UNIT WEIGHT
QUANTITY
Continued from the procedure Basic Setting: (width, height, angle and label type)
S8.5
← 12
F ITEM
Item setting: Barcode.
[*]
S8.5
0
X MM
Enter item data programming mode.
[5][*]
S8.5
0
Y MM
Enter X value (Ex.5mm).
[2][0][*]
S8.5
0
DG ANGLE
Enter Y value (Ex.20mm).
[>>][*]
S8.5
0
HT MM
Select print angle (Ex.90 degree).
[1][5][*]
S8.5
0
STATUS
Enter height value.
The height of Barcode printing area is 15mm
(Ex. 15mm).
[2]
S8.5
2
STATUS
Enter print status (Ex. ALL PRINT).
[*]
S8.5
← 12
F ITEM
