DC-400
Operation Manual
Service & Support Dept. ©2018 SHANGHAI TERAOKA ELECTRONIC CO., LTD.
40 of 65
Base Type 5
Item data in Base Type 5 are Alpha-numeric data. The print position of item data can be programmed by setting the max.
print area , X / Y value, width of print area from X value, height of print area from Y value, print angle and character size.
OPERATION
DISPLAY
REMARK
WEIGHT
UNIT WEIGHT
QUANTITY
Continued from the procedure Basic Setting: (width, height, angle and label type)
S8.5
← 1
F ITEM
Item setting: ID Code.
[*]
S8.5
0
X MM
Enter item data programming mode.
[1][0][*]
S8.5
0
Y MM
Enter X value (Ex.10mm).
[1][*]
S8.5
0
DG ANGLE
Enter Y value (Ex.1mm).
[>>][>>][*]
S8.5
0
WT MM
Select print angle (Ex.180 degree).
[2][0][*]
S8.5
0
HT MM
Enter width value.
The width of ID Code printing area is 20mm
(Ex. 20mm).
[1][5][*]
S8.5
0
STATUS
Enter height value.
The height of ID Code printing area is
15mm (Ex. 15mm).
[2]
S8.5
2
STATUS
Enter print status (Ex. ALL PRINT).
[*]
S8.5
S1
CHAR SIZE
The status of ID Code printing area is all
item printing.
[>>] four times
S8.5
S5
CHAR SIZE
[<<] or [>>] key can change the selection of
the character size.
(S1~S5; M1~M5)
[*]
S8.5
← 1
F ITEM
