DC-400
Operation Manual
Service & Support Dept. ©2018 SHANGHAI TERAOKA ELECTRONIC CO., LTD.
51 of 65
4.3.2 Digital tare Subtraction
1 - ZERO 2 - NET 3 - RECOM 4 - INSUFF 5 - LABEL 6 -
∑
7 - IN 8 - OUT
OPERATION
KEYS
WEIGHT
UNIT
WEIGHT
QUANTITY 1 2 3 4 5 6 7 8
Stand-by-status.
0.0000kg
0
0
Key in the tare weight (Ex. 5g).
[0][.][0][0][5][T]
-0.0050kg
0
0
Clear the tare weight.
[T]
0.0000kg
0
0
4.4 Item Call Up
1 - ZERO 2 - NET 3 - RECOM 4 - INSUFF 5 - LABEL 6 -
∑
7 - IN 8 - OUT
OPERATION
KEYS
WEIGHT
UNIT
WEIGHT
QUANTITY 1 2 3 4 5 6 7 8
Stand-by-status.
0.0000kg
0
0
Enter the ID Code (Ex. 123AB).
[1][2][3][A][B]
0.0000kg
0
0
Call up.
[CODE]
0.0000kg
0.1000
0
Return to stand-by-status.
[C]
0.0000kg
0
0
4.5 Set New Item Code in Registration Mode
This function is used to program a New ITEM in Operation Mode and update to ITEM Files. To enable this function, SPEC
4 must set to "0" in advance.
1 - ZERO 2 - NET 3 - RECOM 4 - INSUFF 5 - LABEL 6 -
∑
7 - IN 8 - OUT
OPERATION
KEYS
WEIGHT
UNIT
WEIGHT
QUANTITY 1 2 3 4 5 6 7 8
Stand-by-status.
0.0000kg
0
0
Enter new ID Code (Ex. 123).
[1][2][3]
0.0000kg
0
0
Press [CODE] key to store the
New Item in Item Files.
[CODE]
NEW
ITEM SET
Enter unit weight (Ex. 1.0000).
[1]
[UNIT WEIGHT]
0.0000kg
1.0000
0
Update new Unit Weight to the
item 123.
[UNIT WEIGHT]
0.0000kg
1.0000
0
Return to the stand-by-status.
[C]
0.0000kg
0
0
Call up item 123.
[1][2][3] [CODE]
0.0000kg
1.0000
0
Note:
If you want set new tare value and update to item, after set the tare value and then press [UNIT WEIGHT] key to store.
