DC-400
Operation Manual
Service & Support Dept. ©2018 SHANGHAI TERAOKA ELECTRONIC CO., LTD.
25 of 65
3.4. FACTORY NAME FILE
Factory name is used for programming a short text describing the name of factory. Maximum 32 factory names can be
programmed, each with 3 lines. The number of line depends on the character size. The default Factory Name print on label can
be set in SPEC 56 & print centering of Factory Name on label can be select at SPEC 57.
Note:
Factory Name will not printed on the label if the selected label format without print area for Factory Name or SPEC 55
set
to "0: NO PRINT".
3.4.1. Program Factory Name File
At Programming Mode, select Factory Name programming mode and then enter new Factory Name No. (Ex. 1).
OPERATION
DISPLAY
REMARK
WEIGHT
UNIT WEIGHT
QUANTITY
Press [MODE] key 3
times.
S1
PLU
FILE
Enter S mode. Lamp S turns on.
[2] or [+]
S2
FACTORY
FILE
Select Factory programming mode.
[*]
S2.0
0
NO SET
Enter Factory programming mode.
[1][*]
S2.1
S01.01
S1 A 32
Enter Factory No. (Ex. 1).
[D][I] … [E]
S2.1
S01.10
S1 A 22
Enter Factory Name (Ex. DIGI STORE).
[SHIFT UP][X]
S2.1
S01.10
S2 A 22
Change font size to S2.
(S1~S5; M1~M5)
[CODE]
S2
FACTORY
FILE
Store data, return to S mode.
3.4.2. Print Factory Name File
The Factory Name report can be printed on receipt paper. A Full Report includes all programmed Factory Names and a
Single Report includes one Factory Name data only.
OPERATION
DISPLAY
REMARK
WEIGHT
UNIT WEIGHT
QUANTITY
S2.0
0
NO SET
Enter Factory Name programming mode.
[TARE]
TEST2.0
1
ST NUM
Enter Factory Name report print mode.
[*]
TEST2.0
32
EN NUM
Enter start No.
[*]
S2.0
0
NO SET
Enter end No.
Print Factory Name Full report.
[1]
S2.0
1
NO SET
Enter Factory No. (Ex. No.1).
[TARE]
S2.0
1
NO SET
Print Factory Name Single report.
Return to Factory Name programming
mode.
