DC-400
Operation Manual
Service & Support Dept. ©2018 SHANGHAI TERAOKA ELECTRONIC CO., LTD.
27 of 65
3.6. ADDRESS FILE
Address file is used to program factory address, which can be assigned in each Item and to be printed on the label. Since
standard format does not have a print area set for Address, the Address cannot be printed when using these formats. To print
Address on the label, a Free Format with an Address print area programmed must be used. Maximum 16 Address (No. 1 ~ 16)
can be programmed with each up to 8 programmable lines. Number of line depends on the size of the print area or Character
Size entry.
3.6.1. Program Address File
OPERATION
DISPLAY
REMARK
WEIGHT
UNIT WEIGHT
QUANTITY
Press [MODE] key 3
times.
S1
PLU
FILE
Enter S mode. Lamp S turns on.
[5] or [+] four times
S5
ADDRESS
FILE
Select Address programming mode.
[*]
S5.0
0
NO SET
Enter Address programming mode.
[1][*]
S5.1
P01.01
S1 A 32
Enter Address No. (Ex. 1).
[S][H] … [I]
S5.1
P01.08
S1 A 24
Enter Address (Ex. SHANGHAI).
[SHIFT UP][X]
S5.1
P01.10
S2 A 24
Change font size to S2.
(S1~S5; M1~M5)
[CODE]
S5
ADDRESS
FILE
Store data, return to S mode.
3.6.2. Print Address File
The Address report can be printed on receipt paper. A Full Report includes all programmed Address data and a Single
Report includes one Address data only.
OPERATION
DISPLAY
REMARK
WEIGHT
UNIT WEIGHT
QUANTITY
S5.0
0
NO SET
Enter Address programming mode.
[TARE]
TEST5.0
1
ST NUM
Enter Address report print mode.
[*]
TEST5.0
16
EN NUM
Enter start No.
[*]
S5.0
0
NO SET
Enter end No.
Print Address Full report.
[1]
S5.0
1
NO SET
Enter Address No. (Ex. No.1).
[TARE]
S5.0
1
NO SET
Print Address Single report.
Return to Address programming mode.
