DC-400
Operation Manual
Service & Support Dept. ©2018 SHANGHAI TERAOKA ELECTRONIC CO., LTD.
36 of 65
Base Type 1:
Item data in Data Base Type1 are Numeric data or Fixed data. The print position of item data can be programmed by
setting X / Y value, Print angle and Character size.
OPERATION
DISPLAY
REMARK
WEIGHT
UNIT WEIGHT
QUANTITY
Continued from the procedure Basic Setting: (width, height, angle and label type)
S8.5
← 2
F ITEM
Item setting: Gross Weight
[*]
S8.5
0
X MM
Enter item data programming mode.
[1][*]
S8.5
0
Y MM
Enter X value (Ex.1mm).
[1][*]
S8.5
0
DG ANGLE
Enter Y value (Ex.1mm).
[>>][*]
S8.5
0
STATUS
Select print angle (Ex. 90 degree).
[2][*]
S8.5
S1
CHAR SIZE
Enter print status (Ex. ALL PRINT).
[>>] four times
S8.5
S5
CHAR SIZE
[<<] or [>>] key can change the selection of
the character size.
(S1~S5; M1~M5)
[*]
S8.5
← 2
F ITEM
Note 1:
STATUS TYPE: 0 - NO PRINT 1 - WEIGH PRINT 2 - ALL PRINT
Note 2:
There are two ways to select the Item Data in Free Format programming by using different keys such as:
Enter the Item data number key.
Press [<<] key or [>>] key to search the Item data.
