64 78 759 D3608
58
D3608
.
201.01.07
.
02 10.2017
6 Operation
Dentsply Sirona
6.2 Machining processes
Operating Instructions inLab MC X5
Managing tool magazines
A tool magazine has six user-assignable tool places which are numbered
and can be individually populated via the inLab CAM software
("Configuration /Devices / inLab MC X5 / Machine and Instrument tray
Management / Instrument tray database").
Several tool magazines can be created for different materials. These can
be color-coded using the tool magazine color scheme (D) for better
distinction.
Dummy tool
The available dummy tool (F) is always in the device of the tool magazine
holders and may not be removed. The dummy tool protects the mandrel
and is automatically included during machine downtimes. For this reason,
the compressed air supply to the machine may not be disconnected at
any time as inclusion of the dummy tool cannot take place. The precision
button (G) that is directly next to the dummy tool is to kept clean and it is
used to check the tool length, with which the tool can also be identified.
Tool magazine cover flap
The tool magazine cover flap (H) opens and closes automatically as soon
as the functions of the tool and/or magazine change are enabled in the
software. During the machining processes, the cover flap remains closed
always.
The places of a tool magazine can be equipped with the 3 standard tools
per material (see "Permitted tool combinations"). Associated tools of the
same type can also be used on the other positions. In the case of a tool
loss or when reaching the wear limit of a tool during the process, it is
resorted to the relevant associated tool.
Likewise, a tool magazine can be equipped with different tools (e.g. 3
grinding tools and 3 milling tools of a material).
The magazine is equipped manually, outside of the machine, in
accordance with the allocation positions and tools in the software. Once
the tool or magazine change is enabled in the software, the cover flap of
the tool magazine opens automatically. The closing after equipping also
occurs automatically via the software.
Equipping the tool magazine
In order to equip the tool magazine, proceed as follows:
1. Create a new tool magazine under
"Instrument tray database"
in the
machine configuration menu in the software and assign the intended
tools to the positions 1-6 in the software.
CAUTION
Risk of injury through sharp tools and moving parts
While equipping the tool magazine, there is the risk of cut injuries as the
cutting edges of the tools are very sharp. There is also the risk of
crushing through moving parts.
➢ Make sure that you do not touch the sharp tools and moving parts
while reaching out to the processing chamber.
