Denso VP-5243G, Инструкция по установке и обслуживанию

Страница: 10 / 54

4
1.2 Mounting the Robot Unit
Caution Before handling or installing the robot unit, be sure to read
SAFETY PRECAUTIONS, "Installation Precautions."
1.2.1 Transporting the Robot Unit
An arm fixing plate is used to secure the robot arms during transportation from
the factory and should be removed after installation.
Caution: The robot unit should only be moved prior to installation if the arm fixing plate is in place. The
arm fixing plate should also be affixed if there is the possibility of great impact being applied
to the robot unit during transportation. (See the table below for axes angles when affixing the
arm fixing plate.) If the robot unit is subjected to significant impacts when the arm fixing plate
is not in place, the arm angles may shift slightly and cause Error 6773 to be displayed on the
controller. Encoder resetting and CALSET must be performed if this occurs.
Axis angles when affixing the arm fixing plate
(degrees)
Axis VP-6242G VP-5243G
J1 -90.0000 -90.0000
J2 -40.0420 -39.9915
J3 158.9266 128.9209
J4 0.0000 -
J5 61.1154 91.0706
J6 0.0000 0.0000
Note: Release the brake for all axes after affixing
the arm fixing plate to ensure that stress is not
applied to the individual axes.
Robot Unit and Arm Angles When Packaged (When securing the arms with the arm fixing plate)
The VP-G robot unit weighs approximately 15 kg (32 lbs), making it possible for
the unit to be moved by one person. Always exercise the necessary level of care
and attention when moving the robot unit.
Arm fixing
plate
Handling the VP-G Robot Unit