background image

 

 
Web Site: www.parallax.com 
Forums: forums.parallax.com 
Sales: [email protected] 
Technical: [email protected] 
 

 
Office: (916) 624-8333 
Fax: (916) 624-8003 
Sales: (888) 512-1024 
Tech Support: (888) 997-8267 
 

 

Copyright © Parallax Inc.

 

 

Eddie Robot Platform (28990 & 28992) 

v1.3  1/16/2013  Page 1 of 17 

Eddie Robot Platform 

(Assembled: #28990 / Unassembled: #28992) 

Eddie is a mobile robotics development platform designed to foster creativity, innovation and 

experimentation. Compatible with Microsoft’s Robotics Developer Studio, Eddie can roam autonomously, 

see in 3D using the power of the Microsoft Kinect, and be driven remotely using a wireless controller 

(sold separately). 
 

Eddie’s Control Board uses the Propeller multicore microcontroller to directly control two high-torque 12 V 

motors and collect data from multiple sensors mounted on the robot. Eddie is controlled over a simple 

USB connection and a convenient, open-source command interface. 

Features 

 

Compatible with Microsoft Robotics Developer Studio 
(RDS4) 

 

Two-tiered design provides plenty of room for 

electronics as well as convenient laptop mounting for 

un-tethered, autonomous navigation.  

 

High-torque 12 VDC gear motors 

 

Durable 6” diameter pneumatic rubber tires traverse 

various types of surfaces and terrain. 

 

Three Infra-red distance sensors and two ultrasonic 

distance sensors for object detection and collision 

avoidance 

 

Integrated control board handles all low level hardware 
operations to control motors and collect sensor data 

 

Twin high-capacity 12V , 7.5 Ah sealed lead acid (SLA) 

batteries provide significant run-time between charges 

 

USB connectivity 

 

Built-in charging jack (charger included)  

Key Specifications 

 

Communication Interface: Serial 

commands over USB interface 

 

Operating temperature: 32 to 158 °F (0 to 

70 °C)  

 

Dimensions:  21.75” (55.25 cm) high 
17.8” (45.2 cm) Diameter  

 

Robot Weight:  25.3 lbs (11.5 kg) 

Application Ideas 

 

Autonomous navigation and mapping 

 

Development and testing of machine 

vision systems 

 

Tele-presence robots 

 

Voice-activated personal assistant robots 

 

Security and surveillance robots 

 

Crowd interaction and advertising 

Содержание 28990



















Отзывы: