Delta DVP-10PM, Руководство по применению

Страница: 20 / 561

2
Hardware Specifications and Wiring
DVP-PM Application Manual
2-5
Single-ended common point transistor
output
#1
Item
Spec
Low speed High speed
Single-ended common point
#1
relay output
delay time
ON € OFF 30us
Over-current protection N/A
„ DVP-10PM
Item
Spec
Double-ended differential output
Single-ended common point
relay output
Maximum frequency 1 MHz 200 kHZ
Output indicator LED display; light on = ON, light off = OFF
Output point configuration Y10 ~ Y17 Y0 ~ Y3
Working voltage 5 VDC 5 ~ 30VDC
Max. output current 40 mA 40 mA
Isolation Line driver Photocoupler isolation
Resistive < 25 mA 0.5A/1
點
(4A/COM)
Inductive -- 12W (24 VDC) Current spec.
Lamp -- 2 W (24 VDC)
OFF € ON
Max. output
delay time
ON € OFF
0.2 us
Over-current protection N/A
#1: Y0 ~ Y7 on DVP20PM00D are relay output; FP2+, FP2- on DVP20PM00M are high-speed transistor output, Y2 and Y3 are
low-speed transistor output, Y4 ~ Y7 are relay output. Common point for Y0: C0; common point for Y1: C1; common point for Y2
and Y3: C2; common point for Y4~Y7: C3. Output points of DVP10PM are all high-speed transistor outputs, and Y0~Y3 can be
used as general output points.
#2: The life cycle curve:
Contact
Current(A)
20
0.5
0.1
0.2
30
50
0.3 0.7 1 2
200
300
500
100
1000
2000
3000
O
p
e
ra
ti
o
n
(X
1
0
)
3
120VAC Resistive
30VDC Inductive(t=7ms)
240VAC Inductive(cos 0.4)
ψ
=
120VAC Inductive(cos =0.4)
ψ
100~200VDC
Inductive (t=7~40ms)
30VDC
Inductive
(t=40ms)