background image

The table shows the saturated concentration of Oxygen dissolved in pure water as a function of
temperature, according to standard DIN 30408 part 23. The standard UNI EN 25814 supplies the
same concentration values for temperatures from 0 to 30°C.

The permeability of the membrane of polarographic probes varies with the temperature. The cur-
rent reading obtained by the probe must be corrected according to the difference between the pre-
sent temperature and the calibration temperature.

ENGLISH

140

SATURED CONCENTRATION OF OXYGEN cs (mg/l)

Temperature (°C)

0.0

0.2

0.4

0.6

0.8

0

14.62

14.54

14.46

14.38

14.30

1

14.22

14.14

14.06

13.98

13.91

2

13.83

13.75

13.68

13.61

13.53

3

13.46

13.39

13.32

13.25

13.18

4

13.11

13.04

12.97

12.9

12.84

5

12.77

12.70

12.64

12.57

12.51

6

12.45

12.38

12.32

12.26

12.20

7

12.14

12.08

12.02

11.96

11.90

8

11.84

11.78

11.73

11.67

11.61

9

11.56

11.50

11.45

11.39

11.34

10

11.29

11.23

11.18

11.13

11.08

11

11.03

10.98

10.93

10.88

10.83

12

10.78

10.73

10.68

10.63

10.58

13

10.54

10.49

10.44

10.40

10.35

14

10.31

10.26

10.22

10.17

10.13

15

10.08

10.04

10.00

9.95

9.91

16

9.87

9.83

9.79

9.75

9.71

17

9.66

9.62

9.58

9.55

9.51

18

9.47

9.43

9.39

9.35

9.31

19

9.28

9.24

9.20

9.16

9.13

20

9.09

9.06

9.02

8.98

8.95

21

8.91

8.88

8.85

8.81

8.78

22

8.74

8.71

8.68

8.64

8.61

23

8.58

8.55

8.51

8.48

8.45

24

8.42

8.39

8.36

8.32

8.29

25

8.26

8.23

8.20

8.17

8.14

26

8.11

8.08

8.05

8.03

8.00

27

7.97

7.94

7.91

7.88

7.85

28

7.83

7.80

7.77

7.74

7.72

29

7.69

7.66

7.64

7.61

7.58

30

7.56

7.53

7.51

7.48

7.46

31

7.43

7.40

7.38

7.35

7.33

32

7.30

7.28

7.26

7.23

7.21

33

7.18

7.16

7.14

7.11

7.09

34

7.06

7.04

7.02

7.00

6.97

35

6.95

6.93

6.90

6.88

6.86

36

6.84

6.81

6.79

6.77

6.75

37

6.73

6.71

6.68

6.66

6.64

38

6.62

6.60

6.58

6.56

6.54

39

6.51

6.49

6.47

6.45

6.43

40

6.41

6.39

6.37

6.35

6.33

Содержание DO 9709



















































































Отзывы: