Delta Controls eZFC-424R4-24, Инструкция по применению

Страница: 24 / 85

eZFC-424R4-24 Application Guide
Edition 2.6 Page 23 of 84
Network Settings
The following fields are found in the Network Settings section.
Field
Name
Description
BACnet
Address
Displays the controller's BACnet address. This field is read-only when the DNA
box is checked. If you want to enter a new address, clear the DNA box.
Click here for more information about the BACnet address object.
NFC
Password
Displays the password that secures access to the controller’s NFC chip. The
value range is 0 to 65535. The password is stored on the AV96 object.
The Device Password field on the Delta Controls mobile applications must match
the NFC password before any data can be written to the NFC chip.
DNA
Turns on or off Derived Network Addressing (DNA) automatic addressing. DNA
is turned on when the box is checked; the BACnet address also becomes read-
only. To manually enter a new address, clear the DNA box.
Delta Controls products have the option to use DNA or Derived Network
Addressing, a system of organizing and configuring controllers in a network.
When DNA is enabled, addresses are automatically assigned to a device based
on the BACnet network type and the Delta Controls product type, so that a
device can work out-of-the-box without much set up.
NET1
Protocol
Displays the network protocol currently enabled for the NET1 port. This is a read-
only field.
NET1
Speed
Displays the baud rate for the NET1 port. Any changes to the baud rate will be
applied immediately to all Delta Controls controllers in the network.
NET1
Number
Displays the controller's BACnet network number.
NET1
MAC
Address
Displays the controller’s network address typically set up by the controller’s DIP
switches.
NET2
Protocol
Displays the network protocol currently enabled for the NET2 port. This is a read-
only field.
NET2
Speed
Displays the baud rate for the NET2 port. Any changes to the baud rate will be
applied immediately to all Delta Controls controllers in the network.