Dell XPS 420, Руководство пользователя

Страница: 88 / 226

88
Troubleshooting
Starting Dell Diagnostics From the Drivers and Utilities Media
1
Insert the Drivers and Utilities media .
2
Shut down and restart the computer.
When the DELL logo appears, press <F12> immediately.
NOTE:
If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft
®
Windows
®
desktop; then, shut down your
computer and try again.
NOTE:
The next steps change the boot sequence for one time only. On the
next start-up, the computer boots according to the devices specified in the
system setup program.
3
When the boot device list appears, highlight CD/DVD/CD-RW and press
<Enter>.
4
Select the Boot from CD-ROM option from the menu that appears and
press <Enter>.
5
Type
1
to start the CD menu and press <Enter> to proceed.
6
Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple
versions are listed, select the version appropriate for your computer.
7
When the Dell Diagnostics Main Menu appears, select the test you want
to run.
NOTE:
Write down any error codes and problem descriptions exactly as they
appear and follow the instructions on the screen.
Dell Diagnostics Main Menu
1
After the Dell Diagnostics loads and the Main Menu screen appears, click
the button for the option you want.
NOTE:
It is recommended that you select Test System to run a complete test on
your computer.
Option Function
Test Memory
Run the stand-alone memory test
Test System
Run System Diagnostics
Exit
Exit the Diagnostics
book.book Page 88 Tuesday, November 27, 2007 10:29 AM