background image

Glossary

217

write-protected

 — Files or media that cannot be changed. Use write-protection when 

you want to protect data from being changed or destroyed. To write-protect a 3.5-inch 
floppy disk, slide its write-protect tab to the open position.

WWAN

 — wireless wide area network. A wireless high-speed data network using 

cellular technology and covering a much larger geographic area than WLAN. 

WXGA

 — wide-aspect extended graphics array — A video standard for video cards 

and controllers that supports resolutions up to 1280 x 800."

X

XGA

 — extended graphics array — A video standard for video cards and controllers 

that supports resolutions up to 1024 x 768.

Z

ZIF

 — zero insertion force — A type of socket or connector that allows a computer 

chip to be installed or removed with no stress applied to either the chip or its socket.

Zip

 — A popular data compression format. Files that have been compressed with the 

Zip format are called Zip files and usually have a filename extension of 

.zip

. A special 

kind of zipped file is a self-extracting file, which has a filename extension of 

.exe

. You 

can unzip a self-extracting file by double-clicking it.

Zip drive

 — A high-capacity floppy drive developed by Iomega Corporation that uses 

3.5-inch removable disks called Zip disks. Zip disks are slightly larger than regular 
floppy disks, about twice as thick, and hold up to 100 MB of data.

book.book  Page 217  Tuesday, November 27, 2007  10:29 AM

Содержание XPS 420



































































































































































































































Отзывы: