Dell XPS 420 Скачать руководство пользователя

Страница: 186 / 226

186

Appendix

Boot Sequence

This feature allows you to set the order in which the BIOS will search devices
when trying to find an operating system.

NOTICE:

If you modify any boot sequence settings, save the new settings to avoid

losing the changes.

Option Settings

NOTE:

The computer attempts to boot from all bootable devices, but if no bootable

device is found, the computer generates an error message that states

No boot

device available

. Press the <F1> key to retry the boot, or press the <F2> key

to enter the setup utility.

•

Onboard or USB Floppy Drive —

The computer attempts to boot from

the floppy drive. If there is no floppy in the drive or there is no floppy drive
installed, the computer attempts to boot from the next bootable device in
the sequence.

NOTE:

If there is a non-bootable floppy in the drive, the computer generates

an error message. Follow the on-screen instructions to retry the boot.

•

Onboard SATA Hard Drive

— The computer attempts to boot from the

primary hard drive. If no operating system is on the drive, the computer
attempts to boot from the next bootable device.

POST Hotkeys

(

Setup & Boot

default)

Specifies the function keys to display on the screen when the
computer starts.

•

Setup & Boot Menu

— Display both messages (F2=Setup

and F12=Boot Menu).

•

Setup

— Display the setup message only (F2=Setup).

•

Boot Menu

— Display the

Quickboot

message only (F12=

Boot Menu).

•

None

— Neither message is displayed.

Keyboard Errors

(

Report

default)

Enables or disables keyboard error reporting when the
computer starts.

•

Report

— Display any keyboard errors.

•

Do not report

— Do not display any keyboard errors.

book.book Page 186 Tuesday, November 27, 2007 10:29 AM

Содержание XPS 420



































































































































































































































Результаты поиска

Содержание XPS 420

Отзывы:

Похожие инструкции для XPS 420

Бренды по названию

Популярные бренды

Dell XPS 420, Руководство пользователя

Результаты поиска

Содержание XPS 420

Отзывы:

Похожие инструкции для XPS 420

Бренды по названию

Популярные бренды