Dell Vostro 220 - Vostro 220 Slim Desktop Computer, Руководство по обслуживанию

Страница: 59 / 138

PCI and PCI Express Cards
59
PCI and PCI Express Cards
CAUTION:
Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see
the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
NOTICE:
The procedure for removing and replacing PCI and PCI Express cards is
identical (except where noted) for the Vostro 420, Vostro 220, and Vostro 220s
computers; the illustrations provided are for example only and may not represent
your particular computer precisely.
Removing a PCI or PCI Express Card
1
Follow the procedures in "Before Working on Your Computer" on page 35.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 47).
3
If your computer is a Vostro 220s, remove the chassis support bracket (see
"Removing the Chassis Support Bracket" on page 55). Otherwise, proceed
to step 4.
4
Disconnect any cables connected to the card.
5
Remove the screw that secures the card to the back panel of the computer.
6
Remove the card from the card connector on the system board:
•
For a PCI card , grasp the card by its top corners, and ease it out of its
connector.
• For a PCI Express card , rotate the securing tab away from the card
while grasping the card by its top corners, and then ease it out of its
connector.