Dell USC Скачать руководство пользователя страница 31

Страница: 31 / 132

USC and USC-LCE Features

Driver Extraction

The drivers required for the operating system, or updates recommended for

updating the system after installation, are extracted to a temporary location.

These files are deleted after an 18-hour period or when you press

the <F10> key to either cancel operating system installation or re-enter

USC after rebooting.

NOTE:

During the 18-hour period when drivers are extracted to a temporary

location after the operating system is installed, you cannot update USC or USC-LCE,

drivers, or hardware diagnostics using a DUP. If you attempt an update using a DUP

during this time period, the DUP displays a message that another session is active.

Driver Installation Methods

Table 3-2 lists the driver installation methods for different operating systems.

RAID Configuration

During operating system installation, you can do one of the following:

• Deploy the operating system without configuring RAID
• Configure the disks using the optional RAID configuration wizard and

deploy the operating system.

Table 3-3 lists the operations USC or USC-LCE performs based on the

availability of the RAID controller and the option selected.

Table 3-2. Driver Installation Method

Operating System

Installation Methods

Microsoft

Windows

operating systems

NOTE:

See USC-LCE readme for more

information.

Extracted drivers are installed during

the operating system installation.

Red Hat Linux Enterprise Linux version 4.8 Manually install the extracted drivers

after the operating system installation.

Red Hat Enterprise Linux version 5.5,

SUSE Linux Enterprise Server version 10

SP3, SUSE Linux Enterprise Server version

11 SP1 and later versions

Extracted drivers are installed during

the operating system installation.

Содержание USC





































































































































Результаты поиска

Содержание USC

Отзывы:

Похожие инструкции для USC

Бренды по названию

Популярные бренды

Dell USC, Руководство пользователя

Результаты поиска

Содержание USC

Отзывы:

Похожие инструкции для USC

Бренды по названию

Популярные бренды