Dell USC, Руководство пользователя

Страница: 87 / 132

USC and USC-LCE Operations
87
4
In the right pane, select
Remove encryption and delete data
and click
Next
.
5
Select Delete encryption key and all secure virtual disks and click Finish .
CAUTION:
The existing encryption, virtual disks, and all the data are permanently
deleted.
Upgrading to an iDRAC6 Express Card
This section provides information about installing an iDRAC6 Express card,
transferring the iDRAC6 Express card from one system to another system,
and Uninstalling iDRAC6 Express card. This hardware upgrade also upgrades
USC to USC-LCE.
NOTE:
This is applicable only to Dell System Series
y21x-y51x
.
NOTE:
Some links and features are not accessible if an older version of iDRAC
firmware is used. Ensure that the latest iDRAC firmware is installed.
Installing iDRAC6 Express Card
To install the iDRAC6 express card:
1
Power off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
NOTE:
To discharge the residual power in the system, press the
power button once.
2
Insert the iDRAC6 Express card into the iDRAC6 Express slot.
See the Hardware Owner’s Manual for your system for more information
on installing iDRAC6 Express Card.
3
Reconnect the system and peripherals to their power sources.
iDRAC automatically starts. Wait one minute, before switching on the
system, to allow the iDRAC to fully start.
4
Turn on the system, and then press
<F10>
to enter USC.
USC automatically detects the iDRAC6 Express card installed on the
system and completes the upgrade process.